Products

Product Category

ABEK Sensors offers a wide range of position sensors and accessories, including AC LVDT, DC LVDT, high temperature & high pressure LVDT, dual redundant/channel LVDT, RVDT position sensors, and signal conditioners. Browse our standard products below or contact us for tailored solution.

How to Choose & Step-by-Step FAQs

Q1: I'm choosing a position/displacement sensor for [XXX application scenario]. What are the key parameters I should start with?

 

A: Please provide the following key information so we can find the right sensor for your needs within the product categories below.

  1. What measurement type is required: linear displacement (LVDT) or angular displacement (RVDT)?
  2. What is the required range — linear stroke (in mm) or rotation angle (in degrees)?
  3. What are your operating environment conditions? Consider temperature range, pressure, radiation resistance, oil/water exposure, and whether explosion-proof is required.
  4. What output signal do you need — DC (0-5V, 0-10V, 4-20mA) or AC (sine wave)? And will the sensor connect to a PLC or a dedicated instrument?
  5. What are the installation space constraints? Do you have any specific limits on the sensor's diameter or length?

Q2:DC output vs. AC output LVDT — how do I choose?

 

A: First, let's briefly distinguish between DC-output and AC-output LVDTs. DC-output LVDTs (DC-LVDT) have a built-in demodulation circuit, while AC-output LVDTs (AC-LVDT) do not.

 

Next, here is a simplified selection guideline:

 

Choose DC-output type if: You need DC power (e.g., 24 VDC), a direct DC output (0-5V/0-10V/4-20mA) for direct connection to a PLC, DAQ card, or digital meter, and your operating temperature stays below +85°C.

Choose AC-output type if: You are working in a demanding environment (e.g., high temperature above +85°C, radiation environment, deep water), or you need a long cable (>10 meters), and you are able to use an external LVDT signal conditioning device.

Q3How do I choose between a free core (unguided) LVDT and a spring-loaded LVDT?

 

A: This is the most common structural selection question when choosing an LVDT position sensor. Each type has its own suitable applications. The key difference comes down to whether the target object is easy to connect to the sensor and what the measurement method requires.

 

Structural form: A free core LVDT has a separate core and sensor body. The core rod needs to be mechanically connected to the target object. A spring-loaded LVDT has an internal spring that provides a return force. You simply press the spring-loaded rod against the surface of the target — no fixed connection is required.

Measurement method: With a free core LVDT, the core moves together with the target object while the sensor body remains fixed. With a spring-loaded LVDT, the target object presses against the spring-loaded probe tip to take the measurement, and the internal spring provides the reset force.

Typical applications: Free core LVDT - Valve spool displacement, hydraulic cylinder piston position, automation equipment feedback control. Suitable for high-frequency dynamic measurement. Spring-loaded LVDT - Thickness measurement, deformation detection, roll gap measurement, online spot-checking of finished products. Convenient for rapid, continuous inspection.

Still not sure which LVDT is right for you? No problem — just contact us.

Our engineering team will get back to you with a preliminary model recommendation within 2 hours.

ABEK SENSORS designs and manufactures reliable position sensors for demanding industrial applications. We look forward to our collaboration and to supporting you in achieving your goals

Our specialists are available to provide you with competent and reliable assistance. Kindly complete the form, and we will respond at our earliest opportunity. Alternatively, you can reach out to us via phone at 400-013-6886 or email at info@abeksensors.com

Scroll to Top